# Vanguard AR-15 Receiver 

#### Author
shadowfall

#### Version 
1.2

#### Description 
The Vanguard series is designed to minimize support material and add ease of printing to the lower design. #### Instructions Set support settings to .40 (40 degrees). If your printer cannot print 40 degree overhangs a higher number may be chosen, this will increase printing time. An 8" build platform is required for this version. The model should be oriented horizontally as seen in the renders. 

#### Changelog Vanguard 1.2
*fixed overhang in trigger pocket so trigger springs function
*smoothed rough edges near bolt hold open.

#### Changelog Vanguard 1.1
* fixed cosmetic defects near mag release

#### Changelog Vanguard 1.0 
* based off the hermes 1.3.3 model 
* increased depth of front take down lug recess. 
* removed portions of the bottom of the trigger pocket -added spring guides for the trigger.
* expanded buffer end plate hole. 
* redesigned magwell profile for ease of printing. 
* removed majority of fillets. 
* reprofiled the buffer reinforcement to reduce support required.